Poulan-pro PP258TPC User Manual download pdf (Page 9)

9

WARNING: Never lean over dis-

charge chute. Rocks or debris could be

thrown into the eyes and face and cause seri-

ous injury or blindness.

WARNING: Inspect area before

starting unit. Remove all debris and hard ob-

jects such as rocks, glass, wire, etc., that can

ricochet, be thrown, or otherwise cause injury

or damage during operation.

S Direct material discharge away from glass

enclosures, automobiles, etc.

S Do not run engine at high speed while not

removing snow .

S Be attentive when using the snowthrower,

and stay alert for holes in the terrain and

other hidden hazards.

S Make sure the rotor will spin freely before at-

taching the snowthrower to the powerhead.

S If the rotor will not rotate freely due to frozen

ice, thaw the unit before thoroughly before

attempting to operate under power.

S Keep the rotor clear of debris.

S Do not throw snow near other people. The

snow thrower could propel small objects at

high speed causing injury.

S After striking a foreign object, stop the en-

gine, disconnect spark plug and inspect the

snowthrower for damage and repair if nec-

essary before restarting unit.

S Never operate the snowthrower near glass

enclosures, automobiles and trucks.

S Never attempt to use the snowthrower on a

roof.

S Never operate the snowthrower near win-

dow wells, dropoffs, etc.

S Never discharge snow onto public roads or

near moving traf fic.

S Clear snow from slopes by going up and

down; never across. Use caution when

changing directions. Never clear snow from

steep slopes.

S Let snowthrower run for a few minutes after

clearing snow so moving parts do not freeze.

S Look behind and use care when backing

up. Exercisecaution to avoid slipping or fal-

ling, especially when operating in reverse.

S Know how to stop quickly.

ASSEMBLY

CAUTION: If received assembled, repeat

all steps to ensure your unit is properly as-

sembled and all fasteners are secure.

Examine parts for damage. Do not use dam-

aged parts.

NOTE: If you need assistance or find parts

missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the

empty fuel tank.

Finding fuel or oil residue on muffler is normal

due to carburetor adjustments and testing

done by the manufacturer.

TOOLS REQUIRED

S Hex wrench (provided)

INSTALLING PRUNER ATTACH -

MENT

CAUTION:

When removing or installing at-

tachments, place the unit on a flat surface for

stability.

NOTE: The pruner attachment connects to

the engine end shaft through use of a coupler

system. For extra reach, the extension shaft

(included) can be used.

1. Loosen the couplers on the extension

shaft and on the engine end shaft by turn-

ing the knobs counterclockwise.

Shipping

protector

Coupler

Knob

LOOSEN

TIGHTEN

2. Remove shipping protectors from

couplers.

3. Remove shaft caps from pruner attach-

ment and extension shaft (if present).

4. Position locking/release button of attach-

ment into guide recess of coupler on

extension shaft.

5. Push the attachment into the coupler until

the locking/release button snaps into the

primary hole.

Coupler

Primary Hole

Upper

Shaft

Locking/

Release

Button

Attachment

Guide Recess

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 71 72

Comments to this Manuals

No comments