Poulan-pro PP033 User Manual download pdf (Page 14)

14

A

ir Filter

Air Filter Cover

Knob

MUFFLER AND SPARK ARREST -

ING SCREEN

WARNING: The muffler on this prod-

uct contains chemicals known to the State of

California to cause cancer .

As your unit is used, carbon deposits build up

on the muffler and spark arresting screen. For

normal homeowner use, however , the muffler

and spark arresting screen will not require

any service.

After 50 hours of use, we recommend that

your muffler be serviced or replaced by your

authorized service dealer.

REPLACE SPARK PLUG

Replace the s park plug each y ear to ensur e

the engine starts easier and runs better.

Inspec t s park plug every 25 hours of usage.

Clean and/or replace as necessary. Set spark

plug gap at 0.025 inch (0.6 mm). Ignition tim-

ing is fixed and nonadjustable.

NOTE: This spark ignition system complies

with the Canadian standard ICES--002.

1. Twist, then pull off spark plug boot.

2. Remove spark plug from cylinder and

discard.

3. Replace with Champion RCJ-6Y spark

plug and tighten securely with a 3/4 inch

(19 mm) socket wrench.

4. Reinstall the spark plug boot.

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

1. Press the tabs on the side of the trimmer

head and remove cover and spool.

Tab

Tab

Cover

Spool

2. Remove any remaining line.

3. Clean dirt and debris from all parts. Re-

place spool if it is worn or damaged.

4. Replace with a pre-wound spool, or re-

place line using a 25 feet (8 meters)

length of 0.080 inch (2 mm) diameter

Poulan PRO brand line.

WARNING: Never use wire, rope,

string, etc., which can break off and become a

dangerous missile.

5. When installing new line on an existing

spool, hold the spool as shown.

6. Bend the line at the midpoint and insert

the bend into the slot in the center rim of

the spool. Ensure line snaps into position

in the slot.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments