Poulan Pro PP5000P Instruction Manual download pdf (Page 7)

 Throw away and replace blades that are

bent, warped, cracked, broken or damaged

in any other way.

WARNING:

Do not use any blades, or

fastening hardware other than the blades,

washers and nuts recommended by Poulan

PRO. Failure to use proper parts can cause the

blade to fly off and seriously hurt you or others.

 Install required shield properly before using

the unit. Use the metal shield for all metal

blade use. Only use brushcutter attach-

ments that provide a metal shield with

proboscis nose.

Proboscis

nose

 Use only specified bladeand make sure it is

properly installed and securely fastened.

 Cut from your right to your left.

 Always use the handlebar and a properly

adjusted shoulder strap with blade (see

ASSEMBLY instructions in brushcutter

attachment instruction manual).

CULTIVATOR SAFETY

WARNING:

Rotating tines can cause

serious injury. Keep away from rotating tines.

Stop the engine and disconnect the spark plug

before unclogging tines or making repairs.

WARNING:

Inspect the area to be

cultivated before starting the unit. Remove all

debris and hard and sharp objects such as

rocks, vines, branches, rope, string, etc.

 Avoid heavy contact with solid objects that

might stop the tines. If heavy contact occurs,

stop the engine and inspect the unit for

damage.

 Never operate the cultivator without the tine

cover in place and properly secured.

 Keep the tines and guard clear of debris.

 After striking a foreign object, stop the

engine, disconnect the spark plug and

inspect the cultivator for damage. Repair

before restarting.

 Disconnect attachment from the drive engine

before cleaning the tines with a hose and

water to remove any build--up. Oil the tines to

prevent rust.

 Always wear gloves when servicing or

cleaning the tines. The tines become very

sharp from use.

 Do not run unit at high speed unless

cultivating.

HEDGE TRIMMER SAFETY

WARNING:

RISK OF CUT; KEEP

HANDS AWAY FROM BLADE -- Blade moves

momentarily after the trigger is released or en-

gine is turned off. Do not attempt to clear away

cut material when the blade is in motion. Make

sure the switch is in the OFF position, the spark

plug wire is disconnected, and the blade has

stopped moving before removing jammed ma-

terial from the cutting blade. Do not grab or hold

the unit by the cutting blade.

WARNING:

Inspect area before

starting unit. Remove all debris and hard ob-

jects such as rocks, glass, wire, etc., that can

ricochet, be thrown, or otherwise cause injury

or damage during operation.

 Do not use a cutting blade that is bent,

warped, cracked, broken or damaged in any

other way. Have worn or damaged parts

replaced by an authorized service dealer.

 Always keep unit in front of your body.

Keep all parts of your body away from the

cutting blade.

 Keep the cutting blade and air vents clear of

debris.

POLE PRUNER SAFETY

WARNING:

The reciprocating blade/

rotating chain can cause severe injury. In-

spect the unit before use. Do not operate unit

with a bent, cracked or dull blade or dullchain.

Keep away from the blade/chain.

WARNING:

The reciprocating blade/

rotating chain is sharp. Do not touch. To pre-

vent serious injury, always stop engine and

ensure blade/chain has stopped moving, dis-

connect spark plug, and wear gloves when

changing or handling the blade or chain.

WARNING:

A coasting blade/rotat-

ingchaincan cause injury while it continues to

move after the engine is stopped. Maintain

proper control of the unit until the blade/chain

has completely stopped moving. Keep

hands, face and feet at a distance from all

moving parts. Do not attempt to touch or stop

the blade or chain when it is moving.

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Comments to this Manuals

No comments

Poulan Pro PP5000P Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Edgers Poulan Pro PP5000P