Poulan-pro PP4218AVX User Manual download pdf (Page 8)

Tighten

chain

Adjusting Wheel

Loosen

chain

3. Usi ng a screwdriver, m ove chain around

guide bar to ensure all links are in bar

groove.

4. While lifting tip of guide bar, tighten bar

knob securely (clockwise). Hand tight-

en only!

TIGHTEN

Bar

Knob

5. Push lever on bar knob down to return

lever to closed/locked position.

WARNING: Failure to push lever on

bar knob down to closed/locked position

could result in serious personal injury or

damage to your chain saw.

6. Use a screwdriver to move chain around

guide bar.

7. If chain does not rotate, it is too tight.

Loosen bar knob 1 turn (counterclock-

wise); then, loosen chain by turning the

adjusting wheel

turn (upward direc-

tion). Retighten bar knob.

8. If chain is too loose, it will sag below the

guide bar. DO NOT operate the saw if

the chain is loose.

NOTE: The chai n is tensioned correctly

when the weight of the chain does not cause it

to sag below the guide bar (with the chain saw

sitting in an upright position), but the chain still

moves freely around the guide bar.

WARNING: If the saw is operated

with a loose chain, the chain could jump of f

the guide bar and result in serious injury to

the operator and/or damage the chain making it

unusable. If the chain jumps off the guide bar,

inspect each drive link for damage. Damaged

chain must be repaired or replaced.

OPERATION

KNOW YOUR CHAIN SAW

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOU R

CHAIN SA W. Compare the illustrations with your unit to familiarize yourself with the location of

the various controls and adjustments. Save this manual for future reference.

Primer Bulb

Bar Oil Fill Cap

Chain

Front Hand Guard

Front Handle

Starter Rope

ON/STOP

Switch

Muffler

Choke/

Fast Idle

Lever

Fuel Mix Fill Cap

Bar

Sprocket

Hole

Starter Housing

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Comments to this Manuals

No comments

Poulan-pro PP4218AVX User Manual Page 8

Comments to this Manuals